PC software for the RF-Power 8000 Power meter
This meter is available from Giga Technology
Install the driver
The
RF8000 communicates over a USB-to-serial port, that your PC
might not immediately find the right driver for.
In that case, you'll
find a "serial" device marked with a "?" in the device manager.
The
driver is provided with the software package (see above).
As I don't
like drivers that come with a setup routine, I recommend to use the
"rightclick/update driver" function of the device manager.
Just point it to the "drivers_usb_CH340" folder and windows will find and install the driver.
At that point you should see another serial port in the device manager
Register MSCOMM32.OCX
Depending
on other installations on your PC, starting the RF8000 software with the
uninventive name of "english.exe" might result in an error message. In
that case, MSCOMM32.OCX needs to be registered on your system.
To register the OCX, open an "elevated shell" (right click the start button and choose "Windows Powershell (Administrator)")
There type (with the path pointing to your rg_8000 directory):
.\regsvr32.exe C:\Users\admin\Desktop\RFPower8000\rf_8000\MSCOMM32.OCX
Configure the software
The
program "english.exe" needs to be configured for both the COM-Port and
the Baud Rage. It defaults to COM1 and 4800. While with some luck, your
COM-Port might be "1", the baud rate ist not correct. Also: in "Model
selection" choose "RF-Power8000"
Here are the correct settings:
- Model selection RF-Power8000 (F3)
- Port number: set that to what your device manager shows as Com Port. In my case COM6
- Baud Rate: 9600
After that, I have to press the center button to start the meter.
To set the frequency and the attenuation value hit the "spanner and
screwdriver" button.
An RC enthusiast has written his own software for the RF-Power8000- Link to his software
- Download link for his Power Meter software
Here is an screen shot of his application
No comments:
Post a Comment